How to install firmware system Android on mobile samsung?

    How to Install Stock Firmware on Samsung Android Smartphones

  • Step 1: Extract the downloaded firmware zip using any extracting tool to get a .tar.md5 file with a few other files, which are optional
  • Step 2: Extract the Odin zip to get Odin3 The latest version .exe with a few other files
  • Step 3: Switch off mobile 
  • Step 4: Boot the phone into Download Mode by pressing and holding the Home, Power and Volume Down buttons together

Note: Ensure that you have installed Galaxy S3 USB Drivers installed on the computer.
  • Step 5: Run Odin as Administrator on the computer
  • Step 6: Connect the mobile samsang to the computer using USB cable while it is in Download mode. Wait for some time until Odin detects the device. When the phone is connected successfully, the ID: COM box in Odin will turn light blue with the COM port number. This step might take some time
  • Step 7: In Odin, click AP button and select the firmware file with .tar.md5 extension
  • Step 8: Enable Auto Reboot and F.Reset Time checkboxes in Odin. Ensure Re-Partition checkbox is not checked

  • Step 9: Verify everything and click the Start button in Odin. The installation process should begin now and take a few minutes to complete
  • Step 10: When the installation process is completed, the phone will restart automatically. Once the home screen appears on the phone, disconnect the phone from the computer

Previous Post
Next Post

0 التعليقات: